How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19041
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

How do I remove the plastic drive gear on my ge compactor?

Customer Question

How do I remove the plastic drive gear on my ge compactor? The nut is very tight and will not come loose.
Submitted: 10 months ago via ApplianceRepair.Net.
Category: Appliance
Expert:  Kelly replied 10 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! That locking nut is sealed in place with Loctite and torqued on. It will be very difficult to remove. It must be torqued when replacing it, too. Torque is 65 fl lbs and it must be sealed with Loctite when it is reinstalled, too! See the attached page.

Related Appliance Questions