How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19113
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

My Bosch Silence Plus 44 ModelSHX68T52UC/02 has a message

Customer Question

My Bosch Silence Plus 44 ModelSHX68T52UC/02 has a message "watertap" showing up on the led control screen and there is standing water in the machine. I have cleaned out the water, removed the pump cover , cleaned as much as possible and it still sends the message "watertap"
Submitted: 10 months ago.
Category: Appliance
Expert:  Kelly replied 10 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The control sees water issues, either with the water inlet or a drain problem. Is the pump running continuously? If so, there is water in the base of the machine that will need to be dried out. Turn the breaker off for a few hours to reset the control. Any change when set back up to cycle?