Need Appliance Repair Help? Ask a Technician for Answers ASAP
unplug the unit for a few minutes plug it back in and run a calibration test on the washer, click the link below for instructions, if that does not reset it, then the drain pump has failed and will have to be replaced:
If you end up having to replace the water pump and would like the part number and repair instructions let me know.
In the meantime:
PLEASE take into consideration we are on the honor system for our time, I Kindly ask you to rate my service BEFORE YOU LEAVE TODAY by clicking 3 or better on the STAR RATING SYSTEM at the top of your page or wherever the 5 star rating system is located on your page (sometimes it's hard to find but it's there).
Also be aware that this rating is for the quality of my response, not a rating for the overall experience you have had on this site.
Rating me will not in any way affect the amount you agreed to pay for the question. This will also allow you to get directly back to me for FREE follow up questions.
Before leaving a negative rating please discuss it with me first so I can have a chance to remedy the issue. Thank You!
TIPS are not expected but are GREATLY APPRECIATED!
I see this question is still open, If there is nothing else I can do for you concerning this
issue would you please rate my service by choosing a star at the top of the page so that I
can put this question on my completed list. I took the time to help you please take the time to help me. Thank You so much for your understanding and support! If you feel there is a reason you should not give me a rating please let me know, otherwise please go ahead and do that for me Thanks.