How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 78356
Experience:  9+ years being an appliance technician with factory training.
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

My oven fan will not turn off and a beeping sound continues

Customer Question

My oven fan will not turn off and a beeping sound continues to beep and the code F2 is showing What can I do to stop the beeping sound and turn off the fan Thanks *****
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.

F2 means that the oven thinks that the oven sensor is reading incorrectly and it's too hot in the oven which is why the fan keeps running. This is either a bad oven sensor or a bad display relay control board. You can't test the board but you can test the sensor. Open the door and remove the 3-4" long thin metal rod attached to the back wall. There are 2 screws holding the sensor on that you can remove and then pull the sensor forward until you can disconnect it. WIth a multimeter, check the resistance of the sensor at room temperature and it should be about 1080 ohms. If it's not, replace the sensor, otherwise you need to replace your display board.

We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today. If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.

Customer: replied 1 year ago.
I tried that and the beeping did not stop. I will be calling a live technian tomorrow Have a good evening and I hope that I am not charged since the problem was not resolved. I do not require any additional services. Thanks anyway Sarah LAmm
Expert:  Tyler Z. replied 1 year ago.

I'm not sure what you mean. I can't control what fails on your oven. I already told you that you need to replace one of the parts to fix the issue. The only way to stop the beeping in the mean time is to shut the power off to the over. This is not a free service. Your card was charge in order to ask this question and take my time.