How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19150
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have Creda EHH 302 - 4 burners. BURNER 1(front) - doesn't

Customer Question

I have Creda EHH 302 - 4 burners.
BURNER 1(front) - doesn't turn on
BURNER 2(front) - turns on but is goes to max setting immediately
BURNER 3(rear) - works but doesn't stay at knob setting temperature
BURNER 4(rear) - same as BURNER 3
I'm a Field Service Engineer for Nuflare America. We make mask writers for Intel. I am capable of fixing this stove. All I need is a parts list and a system schematic(s). Can you help?
Submitted: 11 months ago.
Category: Appliance
Expert:  Kelly replied 11 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The Creda line is no longer supported in the US since 1999. The company at the link below may be able to get you parts but it is not likely. I believe you will need to replace at least both the rear switches and the 1 front one that is on max all the time. The one that is not heating at all may need a new switch or a burner. You may be able to use generic switches, they are 5 wire, two for line voltage (L1 & L2), two for the element wires (H1 & H2) and the pilot lamp (P).

CLICK HERE

Related Appliance Questions