How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 20455
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

1989 maytag washer lint trap wont come out

Customer Question

1989 maytag washer lint trap wont come out
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! On the side of the agitator, right at the bottom where the bottom connects with the top part, there is a small screw. Loosen that screw and the agitator will pull out. Turn it upside down and place the top in a container of white distilled vinegar for 24 hours. That will break down any scale and mineral build up that is keeping the filter in place.

Customer: replied 1 year ago.
What type and size screw head.
Expert:  Kelly replied 1 year ago.

It is not specified but is either a 1/4" hex head or a Torx head T-15. At that age, probably a hex head.