How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Chas Your Own Question
Chas
Chas, Home Appliance Technician
Category: Appliance
Satisfied Customers: 16444
Experience:  Maytag, Whirlpool, GE & Kenmore Factory Trained Service Tech
13353276
Type Your Appliance Question Here...
Chas is online now
A new question is answered every 9 seconds

C970-645121 120v to bake/broil I assume mother board shot?

Customer Question

C970-645121 120v to bake/broil I assume mother board shot?
Submitted: 1 year ago.
Category: Appliance
Expert:  Chas replied 1 year ago.

Hello from our service,

My name is***** am so happy to help you today.

I would like to say that we are also on the honors system. I in good faith am going to do my utmost to ensure your satisfaction. Please before rating me, make sure that I have answered all your questions.
.

During the month of December, all ratings of 3 stars or more, 1/2 of the payment will be donated to help homeless veterans, also all tips given will be donated to 100% to Autism Support Groups.

Have you checked to see if you have 220 volts even coming into the unit at all?

Customer: replied 1 year ago.
220v coming in. All surface elements have 220v red hot.
Expert:  Chas replied 1 year ago.

Then you do have a bad mother board, I was hoping that you didn't have 220 as that would made your problem a lot easier..

All I ask of you is to please rate me with one of the top 3 ratings. If there is anything else I can help you with today just let me know. You can continue asking questions for as long as you like even after you rate me. Tips are welcome if I have helped you a lot, however they are not mandatory

Expert:  Chas replied 1 year ago.

I noticed that the question is still open, if there is nothing else you need, please rate my service to you today, so I may be credited with helping you...

Expert:  Chas replied 1 year ago.

Checking to see if you replaced the part yet?