How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19029
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I am getting the intake drain and salt buttons flashing.

Customer Question

I am getting the intake drain and salt buttons flashing. When I run the dishwasher , it goes through a partial cycle, but stops before the soap dispenses. When I turn it off and restart, it seems to drain but stops again. I checked the bottom and drain pipe, and all clear. I tried to find error code. Pressed 2-3 which resulted in 1 and 2 flashing and 4 staying lit. This is where I am
Submitted: 12 months ago.
Category: Appliance
Expert:  Kelly replied 11 months ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! The two sheets attached show how to access the errors stored and reset them. Can you see what error comes up (if any) and if they will delete and restore operation?