How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9235
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

I have a nice Whirlpool Convection Oven that when I

Customer Question

I have a nice Whirlpool Convection Oven that when I connected it to my 220 line the burners work but nothing else. No display. How do I fix it? GR673LSXB
Submitted: 1 year ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 1 year ago.

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 35 Years,
and have over 100,000 in home repairs and over 80,000 internet repairs under my belt.

Can I please have the Full model number of the unit to better assist you ?
GR673LSXB is only part of the number your missing the last digit on the number.

And are you able to program a Bake or Broil or any cycle on the oven control board?

does the control board/ clock have a display at all?

Customer: replied 1 year ago.
1 is the last digit. No display at all
Expert:  Whrlp Master Tech replied 1 year ago.

Thank you .

did this just happen?

And do you have a volt-ohm meter and know how to use it ?

So you can test for voltage to the control board

Customer: replied 1 year ago.
I bought it from a friend and it was working good at his house. I do have a bolt meter and I can somewhat use it.
Expert:  Whrlp Master Tech replied 1 year ago.

Ok lets remove the rear top panel of the console and test for voltage on the Black P5-3 to the P5-1 Red on the power board .

looking for 240 volts A/C .

and of course this will be with the unit plugged in the the outlet.

Customer: replied 1 year ago.
Here is a picture of my meter. If you could tell me what to put it on
Expert:  Whrlp Master Tech replied 1 year ago.

AC 750 top center position

Customer: replied 1 year ago.
I'm not sure where to test?
Expert:  Whrlp Master Tech replied 1 year ago.

That is the back of the display board.

your model may have the power board behind the lower large panel .

I only have a exploded parts break down to go off of for the part location

Customer: replied 1 year ago.
Pic
Customer: replied 1 year ago.
Full pic
Expert:  Whrlp Master Tech replied 1 year ago.

Remove the cover off the box on the lower left corner the power board should be there!

Customer: replied 1 year ago.
Picture
Customer: replied 1 year ago.
Ok it's getting 244 on the meter
Expert:  Whrlp Master Tech replied 1 year ago.

Ok it is hard to see since the photo is SO big but the P5 connector it on the top right corner it looks like hard to see the wiring is in the way

Test those two wire to each other for voltage looks as if one is white and the other red ???

Customer: replied 1 year ago.
Ok it's getting 244 on the meter.
Expert:  Whrlp Master Tech replied 1 year ago.

ok so then the power board is bad it will need to be replaced.

The link below is to the part you will need from a highly recommended company rated A+ with the Better Business Bureau.
They offer a 100% money back guarantee, EVEN ON INSTALLED ELECTRICAL PARTS, for an entire year!
They are the only company to allow returns on installed parts for a refund and offer a FULL ONE YEAR WARRANTY!

http://www.repairclinic.com/PartDetail/Oven-Control-Board/9761909/1181851 ?rcaid=1000070
If you have any questions just reply back.

Expert:  Whrlp Master Tech replied 1 year ago.

Just checking in I see you have not rated me as of yet!

If you need me again for any other issues you can request me Whrlp Master Tech.

And Even after you rate me Today if you have a question just reply back to me,
I will still assist you, no extra charges .
But rating me is the ONLY way I get paid for my time.

Expert:  Whrlp Master Tech replied 12 months ago.

And Even after you rate me Today if you have a question just reply back to me,
I will still assist you, no extra charges .
But rating me is the ONLY way I get paid for my time.

Related Appliance Questions