Need Appliance Repair Help? Ask a Technician for Answers ASAP
Hi and welcome to Just answer.
May I know what is the model of your Traulsen?
Did you have manual of your machine?
Try this:1. Use security code 0A1 by:2. Pressing the set keypad until CUS is displayed.3. Press the set keypad until left zero is flashing with 3 zeros displayed.4. Press the set keypad until center zero is flashing with 3 zeros displayed.5. Press the down arrow until A is shown in center display6. Press set keypad until right zero is flashing with 0A0 displayed7. Press the up arrow until 1 is flashing in right display8. Press the set keypad. Display should read SP (thermostat set point) indicating controller is in customer access mode.
May I know what happen?
Did you already tried my suggestion? what is the result?
Hi did you already tried my suggestion?
Hope this information will be helpful.
IMPORTANT: RATING IS REQUIRED!! If you are satisfied to my answer please don't forget to rate,,EXCELLENT OR GOOD rating and BONUS are greatly appreciated...
I'm just following up with you to see how everything is going. Did my answer help?
Let me know,Chester