How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tom Goellner Your Own Question
Tom Goellner
Tom Goellner, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1594
Experience:  32 yrs. experience servicing major appliances and HVAC equipment.
6636336
Type Your Appliance Question Here...
Tom Goellner is online now
A new question is answered every 9 seconds

Dishwasher wont fill

Customer Question

dishwasher wont fill
Submitted: 1 year ago.
Category: Appliance
Expert:  Tom Goellner replied 1 year ago.

Disconnect the water line from the fill valve and stick it in a bucket and turn the water on and see if it will fill the bucket. Have experienced some water lines have a check valve in them that won't let water flow , or barely flow. If that is not the problem , use your meter and see if you get 115 volts AC to the valve at the beginning of the cycle for approx. 60 to 70 seconds.If you don't follow the wires where they go through the bottom door opening for a bad wire ( rinse aid leaking deteriorating the wires ) and if that is OK then the problem is the timer

Expert:  Tom Goellner replied 1 year ago.

Get back with your results