How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AUSSIE- Repair Tech. Your Own Question
AUSSIE- Repair Tech.
AUSSIE- Repair Tech., Appliance Tech
Category: Appliance
Satisfied Customers: 4000
Experience:  Appliance Tech with 12 years experience in the Industry.
55003593
Type Your Appliance Question Here...
AUSSIE- Repair Tech. is online now
A new question is answered every 9 seconds

I'm looking burner 20 inch gas stove model Dako. 4 burner

Customer Question

I'm looking for a burner for a 20 inch gas stove model Dako. 4 burner need front burner.
Submitted: 1 year ago.
Category: Appliance
Expert:  AUSSIE- Repair Tech. replied 1 year ago.

Hi there and welcome,

Please supply me the model number if possible (Needed for the correct part supply) and your state and nearest city so I can point you in the right direction regarding your inquiry.

Thank you

Customer: replied 1 year ago.
I have looked but could not find model# *****
Expert:  AUSSIE- Repair Tech. replied 1 year ago.

There is no identification sticker anywhere that you can see? This will make things a bit hard*

Expert:  AUSSIE- Repair Tech. replied 1 year ago.

In all honesty, as with what I would have to do if I was there in person repairing the appliance, you will have to physically remove the burner in question, take it to an appliance repair shop/parts supplier and have them physically match you the correct part from the stock that they keep for this brand,,,

It really is the only way without a model or series number *

Expert:  AUSSIE- Repair Tech. replied 1 year ago.

Im sorry, but there just isnt really any other alternative,,,

Expert:  AUSSIE- Repair Tech. replied 1 year ago.

Checked inside the oven and grill door (If fitted) ? There is a chance it could be on the rear of the oven,, but getting access to that will be extremely difficult without prior experience/training*

You will most likely need an appliance repair person to safely carry out removal from a wall or bench cavity to obtain a model number and source the correct part, or as mentioned above, physically remove the part and source it at the shop..

Expert:  AUSSIE- Repair Tech. replied 1 year ago.

Please, if you have any further questions, just ask, I'm here to help as much as I possibly can.

Thank you

Customer: replied 1 year ago.
OK thanks for your help . I will try again tomorrow. Happy Holidays.
Customer: replied 1 year ago.
Rating for technician 100%.
Expert:  AUSSIE- Repair Tech. replied 1 year ago.

Thank you and good luck, please let me know how you go... i may be able to assist you further yet.

Cheers.

Expert:  AUSSIE- Repair Tech. replied 1 year ago.

If your ready to rate my service, please use the button (Or icon) at the bottom of our conversation bar.

Thank you