How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I have a Maytag Centennial MVWC200XW i have a leak and

Customer Question

I have a Maytag Centennial MVWC200XW i have a leak and purchased a seal repair kit. I have removed most items below and above last removing the tub nut with a spanner wrench and screw to the plate that remained but it still won't budge. I have images.
Submitted: 1 year ago.
Category: Appliance
Expert:  Jamie_2013 replied 1 year ago.

Are you referring to the agitator repair kit?

Customer: replied 1 year ago.
Whirlpool W10435302 Tub Seal and Bearing kit.
Expert:  Jamie_2013 replied 1 year ago.

Please attach the pictures you have.

Customer: replied 1 year ago.
I can take more pictures if necessary this is after removing the basket and the tub nut. The screws have been remove from the plate that remains.
Expert:  Jamie_2013 replied 1 year ago.

See if this video will help you. That can be a tough job.

Customer: replied 1 year ago.
This doesn't help at all and I have seen this one. I have already removed the basket, and this one looks different both in the tub and under the washer.Is there another stop from here? I can't seem to find any videos for this version that looks like mine.
Expert:  Jamie_2013 replied 1 year ago.

Did you take a hammer and chisel to try to beat it downward after you removed everything?

Customer: replied 1 year ago.
I have tried this without much success. Is this really the next step to brute force it?
Expert:  Jamie_2013 replied 1 year ago.

You may find this video more helpful.

Customer: replied 1 year ago.
I was able to remove the plate but I still cants pull the tub out.
Expert:  Jamie_2013 replied 1 year ago.

The round grooved piece around the shaft has to be removed.

Customer: replied 1 year ago.
Should this just turn to the left with a wrench?
Expert:  Jamie_2013 replied 1 year ago.

Related Appliance Questions