How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19126
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

When I turn my Bosch dishwasher on the auto wash light

Customer Question

When I turn my Bosch dishwasher on the auto wash light flashes till I press the start button and then the active light keeps flashing for about 30 second and then the done light comes one. Nothing happened in the dishwasher at all.
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! I suspect there may be an issue with the electronic control. Attached is the tech sheet that will explain how to enter the diagnostic cycle. Can you retrieve any error codes that may be stored and post them, please?

CLICK HERE

Customer: replied 1 year ago.
My unit does not have the digital display. So where would the ABC LED's be.
Expert:  Kelly replied 1 year ago.

The lights above the three buttons will flash. The A B C is just what they label the buttons for instruction.

Customer: replied 1 year ago.
I did what the paper said, press two buttons and powered the unit on. LED A was blinking and LED B was solid. Press the Button and LED A kept blinking. After resetting it again to do the same as above and then two other lights was flashing, the Active and Clean LED was blinking together.
Expert:  Kelly replied 1 year ago.

Which lights on the tech sheet, A, B or C, were flashing?

Customer: replied 1 year ago.
LED A Wash Flashing. I will add a video file to show what happened.
Expert:  Kelly replied 1 year ago.

That would indicate an issue with the fill portion of the cycle, or an overflow issue. Is the pump running at all?

Customer: replied 1 year ago.
Something tries but no what pumps in. How can I send a 35 meg video to show the exact sequence.
Expert:  Kelly replied 1 year ago.

You will have to upload it to Youtube and send me the link.

Customer: replied 1 year ago.
https://www.youtube.com/watch?v=n5WUOY5naBg&feature=youtu.be
Customer: replied 1 year ago.
I just added the Video.
Expert:  Kelly replied 1 year ago.

Can you hear the water valve humming or buzzing? It sounds like the water valve may be faulty.