How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6158
Experience:  30 YRS EXP. FACTORY TRAINED AND AUTHORIZED ON ALL MAJOR BRANDS
13971964
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

Dishwasher handle assy #w10130694 how do I disconnect the

Customer Question

dishwasher handle assy #w10130694 how do I disconnect the wire quick connect on either side of the assy? Is there a pin or something on the spade ? I cannot pull the connector apart
Submitted: 1 year ago.
Category: Appliance
Expert:  MRANSWER replied 1 year ago.

These can be on very tight. Pry the connectors off with a screwdriver using the switch as a pry point. You WILL NOT break anything that is needed as the new latch has switches on it. The connector WILL NOT break, so do not be afraid to just do this. IF the spade terminals are stuck in the connector after you pull off then connector then just grab it with a pair of pliers and yank it out.

Expert:  MRANSWER replied 1 year ago.

You have not rated the answer- what else is needed?