How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
14958677
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

I'm getting code L43 on my Dacor 27" wall ovens Millenium

Customer Question

I'm getting code L43 on my Dacor 27" wall ovens Millenium series
Submitted: 1 year ago.
Category: Appliance
Expert:  Bob L Your Appl Pal replied 1 year ago.

Sorry you are having trouble with your Oven..The L43 error indicates a fault between the relay /Control Board..You are going to have to do some trouble shooting on the wire harness and connectors between each board..

Not all of the pin connectors from the wire harness are making contact with their respective terminal at the Control and/or Relay Boards. Check to make sure that all pins are seated properly in to the Molex plug and that each connector is properly making contact with the correct terminal at the Control and/or Relay Board. Wires to Relay Board and Controller should ONLY be removed with POWER OFF to unit or C43 WILL occur. This error is not reversible. Controller will need to be replaced.

Expert:  Bob L Your Appl Pal replied 1 year ago.

A common fault is the actual plug itself Check those closely..

Expert:  Bob L Your Appl Pal replied 1 year ago.

Plug meaning the plastic Molex connector at the wire harness..

Expert:  Bob L Your Appl Pal replied 1 year ago.

This is a very entailed job to tackle specially if you have never worked on this type of repair before..If you do have any further questions i will be standing by..If not please remember to rate my answer to you before leaving today..Thank You Bob

Expert:  Bob L Your Appl Pal replied 1 year ago.

Please let me know if you have any further questions Thank You Bob

Related Appliance Questions