How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AppTech8579 Your Own Question
AppTech8579
AppTech8579, Home Appliance Technician
Category: Appliance
Satisfied Customers: 1553
Experience:  worked on appliances for around 10 years
76126576
Type Your Appliance Question Here...
AppTech8579 is online now
A new question is answered every 9 seconds

My dishwasher clean light keeps flashes but they are not

Customer Question

Hi JOhn
My dishwasher clean light keeps flashes but they are not clean - the Heated Dry button light (to the right) is on. Can't clear - or get it to start.
Submitted: 1 year ago.
Category: Appliance
Expert:  AppTech8579 replied 1 year ago.

Please post model number.

Expert:  AppTech8579 replied 1 year ago.

I see this question is still open, do you need more help? Please rate me a 3 star at the top of your page so I may get credit for helping you, thanks!

Customer: replied 1 year ago.
Dear Jamie-2013
I don't have an answer to my problem. . The model is silent Quite Partner II Model(###) ###-#### ***** charged me for an answer and I don't have it. I would like instructions to stop the clean light from blinking or refund my 25 dollars which you charged almost immediately after the deposit. Why did you charge $25 for an answer when there isn't one - this is still open.
Expert:  AppTech8579 replied 1 year ago.

You only made a deposit. I am not paid until you use the star chart at the top and give me a 3 star rating. Give me a minute while I look up some info about your machine.

Expert:  AppTech8579 replied 1 year ago.

Count the number of flashes between pauses and let me know

Customer: replied 1 year ago.
I understood the deposit was $5.00 and then $23.00 for the answer. i will rate you once I have an answer.
Expert:  AppTech8579 replied 1 year ago.

Not a problem. On your control panel, do you see high temp wash and heated dry?

Customer: replied 1 year ago.
I opened door - pushed high temp - heated dry - high temp - heated dry - closed door. 7 flashes and then a pause on clean light.
Expert:  AppTech8579 replied 1 year ago.

Did you press cancel after pressing the high temp, heated dry, high temp, heated dry?

Customer: replied 1 year ago.
i did this sequence with door open and door closed.
Expert:  AppTech8579 replied 1 year ago.

Okay 7 flashes indicate there is a flow meter failure.

Customer: replied 1 year ago.
What is a flow meter failure? How do I fix that?
Expert:  AppTech8579 replied 1 year ago.

The flow meter is what detects the water flow. You will need to replace it and if that doesnt fix it then the control board is faulty and will need to be replaced.