How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I have a GE profile dishwasher model pdw8000go1bb and seems

Customer Question

I have a GE profile dishwasher model pdw8000go1bb and seems to run normal for 10-15 minutes, then stops and the antibacterial light is flashing. it does drain and fill, arms rotate, no leaking, no beeping. I did turn power off at breaker for ten minutes and restart, same problem. I did take out filters and clean, same problem. start light does not blink. GE customer service could only suggest a service call.
thank you
Submitted: 1 year ago.
Category: Appliance
Expert:  MRANSWER replied 1 year ago.

There is a control board issue here, but the part is over $300 so it's time to go shopping as this is not worth spending that much on for a single repair as no new life is given to any other part on this if you replaced the control.