How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

MY LAUNDRY CENTER DOESNT WORK, START THEN WORK 15 SEC, THEN

Customer Question

MY LAUNDRY CENTER DOESNT WORK, START THEN WORK 15 SEC, THEN SHUT DOWN
THE LED D15 START TO BLINK CONTINUOSLY
Submitted: 1 year ago.
Category: Appliance
Customer: replied 1 year ago.
my laundry center is FRIGIDAIRE SFLG1011MW
Expert:  Whrlp Master Tech replied 1 year ago.

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 35 Years,
and have over 100,000 in home repairs and over 80,000 internet repairs under my belt.

Ok I apears you are saying that a error code of D15 is displayed .

Is that correct?

And could it possibly be E51 , on your model Im not seeing any D error codes at all.

Let me know .

Customer: replied 1 year ago.
the led is located on the knob board, the main knob, its to start and stop, behind the knob is located the led with this letter d15
Expert:  Whrlp Master Tech replied 1 year ago.

When it is showing this D15 is the unit buzzing? anf will the unit doe anything after this D15 is displayed?

Customer: replied 1 year ago.
i start de dryer, and it works around 10 seconds later, shut down and the led start to blink, then nothing
i have to start again, but do it the same
Expert:  Whrlp Master Tech replied 1 year ago.

And is this when you are using the washer or the dryer?

Expert:  Whrlp Master Tech replied 1 year ago.

Ok So then I assume the washer has no issues then correct?

Customer: replied 1 year ago.
WHEN I USE THE DRYER
Expert:  Whrlp Master Tech replied 1 year ago.

Ok I find no error codes at all that start with a letter D all the error codes that the manufacturer shows a E error codes .

I have to assume the issue is the dryers main control board.

Have you tried unplugging the unit or turning the breaker off for over 5 minutes ?

This may reboot the control board .

If not let`s try that.