How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 20419
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

Maytag Neptune MHW200DAWW WASHER doesn't work. When press

Customer Question

Maytag Neptune MHW200DAWW WASHER doesn't work.
When press the Start, trying to get little water, and get OFF.
What can be problem?
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! That is a common issue on these and usually is the result of a poor connection in the neutral line right at the water inlet valves where the neutral is split. Are you able to replace the connectors on the white neutral wires on the water valves?

Customer: replied 1 year ago.
Thanks,
So I have to open the front cover and look for white neutral wire close to water valve to replace connector ?
Expert:  Kelly replied 1 year ago.

Correct, the white wires that are actually attached to the water valves.