How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74424
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

How can I replace the cap/cover to the agitator of my

Customer Question

How can I replace the cap/cover to the agitator of my Kenmore Elite Calypso? Snapped it on but came off again. Appears there may have been an adhesive around the edge of the cap/cover?
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.

There is no adhesive that holds the cover on. There is just a lip at the bottom of the cap which holds onto the wash plate/agitator. You should just need to push it down and it'll clip in place. If not, then the lip may have worn down too much when prying it off and you may need to order a new cap.