How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9249
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

The water control switch does not work on then cold setting.

Customer Question

The water control switch does not work on then cold setting. I can put it on any other water temperature but cold is always the rinse cycle and that is where it quits.
Submitted: 1 year ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 1 year ago.

Thank you for requesting me!

Do you have a Volt-Ohm meter ,and know how to use it?

and is this an old or new unit? and is it a front loader or top loading washer?

Customer: replied 1 year ago.
I know how to use a Volt-Ohm meter and it is a top loader.
Expert:  Whrlp Master Tech replied 1 year ago.

ok open the lid the model serial tag should be under the lid at the rear of the opening on the top panel.

Customer: replied 1 year ago.
Ok I'm not at the machine now and I'm trying to get about 20 other things done. Can I continue this at a later time?
Expert:  Whrlp Master Tech replied 1 year ago.

You sure can, Just copy This conversations URL and paste it into your favorites and get back to me when you can!