How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74467
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Lets chat about a Maytag Centenial mod mvwc360aw0, just

Customer Question

Lets chat about a Maytag Centenial mod mvwc360aw0, just before 2 year old wouldn't spin out the wet clothes, usually better after a secondary spin cycle. after couple months more washes poorly, clothes wet but not clean. sometimes stays in sensing mode looonnng time. Spin sensor fault E7. Have dismantled splutch, looks great, belt & pulley OK. actuator looks OK? ideas?
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.

If you're getting a spin sensor error then that explains the problem. The actuator isn't reading the speed properly or it's not shifting the gearbox correctly. You'd need to replace the actuator which has the speed sensor built into it. Below is a link to the part.

CLICK HERE for part

We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today. If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.

Expert:  Tyler Z. replied 1 year ago.

Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?