Need Appliance Repair Help? Ask a Technician for Answers ASAP
The circuit board is up above the top oven. You'll need to pull the entire oven out about 12 inches and remove the top sheet metal access panel to expose the control board. To pull the oven there are just a few screws going in through the right and left side trim so remove those screws and then pull the oven forward a bit so you can remove the top sheet metal panel.
We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today. If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.
Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?