How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74454
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

Have replace the switch that Tyler said would probably fix

Customer Question

Have replace the switch that Tyler said would probably fix problem. Still not letting water fill before going into cycles
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.

If the washer is agitating and not filling, something is still going on with that pressure switch because nothing else can possibly cause this issue. I don't know if the part came faulty or what, but you may need a technician to look at it on-site if you replaced the part correctly and still have the issue.