How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19126
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have A F&P Product No 93208-A The motor control board got

Customer Question

Hi Josh, I have A F&P Product No 93208-A
The motor control board got wet and turned on that blew a surface mounted diode or resistor not sure on a P7CP. I require a schematic diagram.
Submitted: 1 year ago.
Category: Appliance
Expert:  Rob replied 1 year ago.

Sorry for the delay inreplying, I only just came online and saw your question. Are youstill looking for help with this?

Thanks

Rob

Customer: replied 1 year ago.
Trying to find a schematic diagram for a F&K Motor control board (Mod) MKT( Product No) 93208-A pcb (P7CP)
After checking the only problem is a blown diode or resistor, not sure what it is as the component has disappeared
(vapourized).
Thanks
Jason
Expert:  Rob replied 1 year ago.

Hi

Ihave put a call out for the schematics of this machine

WhileIm waiting Ill opt out.

Thismeans that if someone else has this information, they will respond toyou directly.

Inthe meantime, please DO NOT rate or respond to this question, as thiswill lock your question

Thanks

Rob

Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! Board schematics are not released by the manufacturer, they are proprietary. You will likely need to replace the board, available below.

CLICK HERE