How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74465
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

The drying cycle was interrupted by opening the door now the

Customer Question

the drying cycle was interrupted by opening the door now the res LED keeps flashing and beeps if I close the door I cannot cancel/drain the blue LED for start and red LED continuously flaSHING
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.

Try to reset the circuit breaker for 5 minutes to see if the electronics will reset. If that doesn't work, then please reply back with the model number. The number you have listed is actually a part number and the model is located on a sticker around the front frame of the tub which can be seen if you open the door.