Need Appliance Repair Help? Ask a Technician for Answers ASAP
OK so you may have got a bad igniter or bad control board. You'll need a multimeter and you'll need to disconnect the 2 wires to the igniter. Test power between the 2 wires going to the igniter and turn the oven on to see if it's got 120 volts between the 2 wires. If so---return the igniter and get a new one because it came faulty.Now if you don't have 120 volts between the 2 wires, test power between each wire to ground. If you have 120 volts between one of the wires to ground, then replace the oven gas safety valve because the neutral is being cut out. If you don't have 120 volts on either wire, you'll need to replace the control board.We are on the honor system here. Please remember to rate my service by selecting a star at the top of the screen before you leave today. If you need anything else, just let me know. You can continue asking follow-up questions at no additional charge after rating my service if you still need assistance.