How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6160
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

I have kenmore /frigidaire built french door modle970-707035

Customer Question

hi i have kenmore /frigidaire built french door modle970-707035 led light in fridge not working looking @ WIRING DIAGRAM CAN SEE Which control board would be causing problem. on the led power board diagram showes 120 v at pins j1-3 &j1-1 is there 120v there all the time or only when door is openall getting fault code sycf freezer lights work ok done thing they are leds,not sure when door magnet on french doors is located. i do service work but not on this brand thanks marlowe
Submitted: 1 year ago.
Category: Appliance
Expert:  MRANSWER replied 1 year ago.

The sy cf is a communication failure, so that is probably the problem with the lights as well. You will need to do some testing to detrmine if this is just a bad connection or have a board failure.

Customer: replied 1 year ago.
so can you tell me is there 120 v between j1-3& j1-1 on led power board
Expert:  MRANSWER replied 1 year ago.

The led board has power only when the switch calls for lights to be on

Customer: replied 1 year ago.
is the magnetic switch fed from the main pcb
Customer: replied 1 year ago.
were is the mag. switch located
Expert:  MRANSWER replied 1 year ago.

You do not have the full model# ***** so I cannot see how this is built.

Customer: replied 1 year ago.
it is a Kenmore fridge model on tag is###-##-####ser#4a23110259
Expert:  MRANSWER replied 1 year ago.

That does not come up.

I am making you an offer for live help to continue this.

Customer: replied 1 year ago.
I am in Canada are you asking me to pay $27 more for you to call me
Expert:  MRANSWER replied 1 year ago.

There is an extra charge for a call. This explains why I cannot find the model# ***** well as it is not a US unit. I can call you.

Customer: replied 1 year ago.
no thanks
Expert:  MRANSWER replied 1 year ago.

ok. This will remain open then.

Customer: replied 1 year ago.
thank you