How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I bought a whirlpool dryer 2 years ago. it is model#

Customer Question

I bought a whirlpool dryer 2 years ago. it is model# ***** will not dry correctly. I think I need a moisture sensor. I put it on automatic dry settings or manual settings it stops after several minutes. I have to set it again on manual a few times just to get the clothes dry. I do not overload it. Can you give me the part number and name that I need so I can order it.
Submitted: 1 year ago.
Category: Appliance
Expert:  Whrlp Master Tech replied 1 year ago.

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 35 Years,
and have over 100,000 in home repairs and over 80,000 internet repairs under my belt.
I`m trying to get Whirlpool site to open to get a wire diagram!!

Expert:  Whrlp Master Tech replied 1 year ago.

Gosh!! finally

Have you run the unit in the diagnostic mode yet?

I`m assuming you did to think it is the moisture sensor correct?

Customer: replied 1 year ago.
Expert:  Whrlp Master Tech replied 1 year ago.

ok so which error code did you get in diagnostics