How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 21190
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a Magtag Neptune washer model MAH6700AWW and half way

Customer Question

I have a Magtag Neptune washer model MAH6700AWW and half way into the cycle it stops and gives me an E3 error code. What do check?
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.

Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you!

The E3 error means that the control is trying to engage the motor but is seeing no response from the motor sensor.

See the page below.

Expert:  Kelly replied 1 year ago.

The sensor is part of the motor assembly. Check all the motor connections and the connections at the harness as it plugs into the control. The motor may need to be replaced.