How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19144
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

My dishwasher wouldn't drain. I cleared the clog by sucking out

Customer Question

My dishwasher wouldn't drain. I cleared the clog by sucking out the line with my shop vac. Ran the diagnostics NO error codes. Now the dishwasher won't fill. Any suggestions ? I did lay it down on the door to access the hoses & pumps easi
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.
Hi, welcome to Just Answer. My name is ***** ***** I look forward to helping you! There is a float switch that has probably gotten jammed in the up position, preventing the power from getting to the water inlet valve. The float is in the right front corner of the tub. Does it move up and down freely? The float is shown as number 13 in the diagram below. CLICK HERE

Related Appliance Questions