How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19150
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a may tag bravos he top loader. Wash cycle complete

Customer Question

Hi. I have a may tag bravos he top loader. Wash cycle complete and bottom of load wet and top of load partially dry. Laundry soap dispenser clean. Blanket smelled clean just soaking wet. I put on drain and spin cycle and after a few seconds and sensing, started to drain and spin. After a few seconds start and lid lock flashing. No motor/washer movement. Attempted to restart Darin /spin cycle again with same response. Tried diagnostic reset and now I cannot get washer to power on. Power is on at outlet.
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.
Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you! if it will not power one now, it sounds like the machine control may be faulty. Unplug for a couple hours, any change?

Related Appliance Questions