How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74432
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

After a power failure my stove display says LOC - I've checked

Customer Question

after a power failure my stove display says LOC - I've checked the manual and cannot find the 'control lockout' section in it. HELP!!!
Submitted: 1 year ago.
Category: Appliance
Expert:  Tyler Z. replied 1 year ago.
If the control board didn't short out, you should just need to press and hold the "0" and "9" buttons together for 5 seconds to reset the control lock. Unfortunately since this issue occurred after a power outage I wouldn't be surprised if you have a shorted display control board.
Expert:  Tyler Z. replied 1 year ago.
Hello again. I'm just following up because I haven't heard back from you and I see this question is still open. Is there anything else I can help you with?