How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
13570846
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

Yes my name is ***** ***** I need to replace the temperature sensor, part # *****

Customer Question

Hi, yes my name is ***** ***** I need to replace the temperature sensor, part # ***** in my Samsung side by side refrigerator. Located in the back of the freezer. My problem is there are three connector sockets to plug into. Does it go in the top, middle or bottom slot? I forgot to note this when I took out the old one.
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Medic replied 1 year ago.
Hi, the plastic connector should only snap into one spot. It might start to go into the other two opening but it will only lock into one place. Once it snaps into place it's set.
Customer: replied 1 year ago.
Thank you very much! My refrigerator /freezer is working fine now!
Your answer was right on the mark!Nick

Related Appliance Questions