How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Guru Your Own Question
Appliance Guru
Appliance Guru, Owner and Technician
Category: Appliance
Satisfied Customers: 14410
Experience:  Over 15 yrs. experience with 10,000+ in home repairs.
Type Your Appliance Question Here...
Appliance Guru is online now
A new question is answered every 9 seconds

Robert. I just replaced the rollers, belt and pulley

Customer Question

Hi Robert.
I just replaced the rollers, belt and pulley wheel. Reassembled the dryer, and nothing when I hit the start button. If I hold it down, it beeps multiple times and then presents the f70 error code. Any ideas?
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Guru replied 1 year ago.
That is a communication failure code. Whirlpool was replacing the main control board free of charge for that. Double check the interface board connection to the main board. If that does not solve it you need a new main control board. Very common issue.

Related Appliance Questions