How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19126
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

When my Maytag washer goes into the spin cycle it sounds like

Customer Question

When my Maytag washer goes into the spin cycle it sounds like I have loose balls of some sort flopping around in the machine but on the outside of the tub
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.
Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you! There is a pressure hose that leads from lower part of the machine up to the control. If the tie that secures it in the machine comes loose, it will bounce against the tub as it spins. I suspect that may be the case with your machine. Can you remove the rear access panel to get a look around the sides of the tub?