How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Appliance Medic Your Own Question
Appliance Medic
Appliance Medic, Home Appliance Technician
Category: Appliance
Satisfied Customers: 10831
Experience:  Factory Trained CFC Technician
13570846
Type Your Appliance Question Here...
Appliance Medic is online now
A new question is answered every 9 seconds

Kitchaid # ***** ; Normal and Rinse Only lights blinking.

Customer Question

Kitchaid # ***** ; Normal and Rinse Only lights blinking. will not start
Submitted: 1 year ago.
Category: Appliance
Expert:  Appliance Medic replied 1 year ago.
Hi, when this happens it means the touch pad senses a stuck or shorted key. You can try unplugging it for several minutes. Unplugging it may possible reset it. I doubt it will but it's worth a shot.The touch pad is the part with the buttons on it. It's actually very straight forward to replace. Once the DW is unplugged the screws around the door and control panel come off. Then the panel and front will come off. The wire connections are plug and play. You can get the parts from any local appliance parts house or sears parts. See link below to sears parts. http://www.searspartsdirect.com/kitchenaid-dishwasher-parts/model-KUDS01IJWH0/0593/0130000/W0503176/00002.html We work on the honor system here at Just Answers. Were not credited for our work until you rate our answers positively. After you rate our answers positively the question does not close. You can come back and ask follow up questions for no additional charge. Thank you