How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Kelly Your Own Question
Kelly
Kelly, Appliance Technician
Category: Appliance
Satisfied Customers: 19129
Experience:  Highly accurate diagnostician with over 30 years experience!
11418111
Type Your Appliance Question Here...
Kelly is online now
A new question is answered every 9 seconds

I have a whirlpool ADG6340it stopped working, and the

Customer Question

Hi I have a whirlpool ADG6340
it stopped working, and the power button flashes
Submitted: 1 year ago.
Category: Appliance
Expert:  Kelly replied 1 year ago.
Thanks for counting on us to help with your appliance problem. My name is ***** ***** I look forward to helping you! The flashing power button is an error code. How many flashes between pauses, please? The URL below will show you what each of the errors mean, corresponding with the number of flashes.
http://www.ukwhitegoods.co.uk/help/fix-it-yourself/fault-codes/dishwasher-fault-codes/3048-whirlpool-dishwasher-a-clones-fault-codes.html
Customer: replied 1 year ago.
Hi Kelly, it flashes 9 times between pauses
Expert:  Kelly replied 1 year ago.
Thank you, ***** ***** a water inlet fault. If the water is not continually filling, the main electronic control will need to be replaced.
F9 - Continuous Water Inlet
Water inlet valve is switched off, water indicator on, flow meter sends impulses (more than 10 imp. in 10 sec.)
Water inlet valve mechanically not closed
Triac on the control board permanently switched on. (short circuit)