How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 13453
Experience:  Appliance repair business owner for over 43 years.
12064207
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

I replaced the motor, blower, and belt on the dryer. No start

Customer Question

I replaced the motor, blower, and belt on the dryer. No start of the motor- gas lights up and then shut down. The thermal fuse has continuity. Not sure where the problem is at this point. There are no error codes either.
Submitted: 1 year ago.
Category: Appliance
Expert:  Jon replied 1 year ago.
Have you check continuity of the motor or power to the motor while in operation? That will be the only definitive way to know if the control board is bad or the motor. most likely the board since you have already replaced the motor.
In all your steps have you checked the belt switch as well?
That too can cause the motto not to run.

Related Appliance Questions