How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bob L Your Appl Pal Your Own Question
Bob L Your  Appl Pal
Bob L Your Appl Pal, Home Appliance Tech
Category: Appliance
Satisfied Customers: 7548
Experience:  23 Years Major Appliance Repair
14958677
Type Your Appliance Question Here...
Bob L Your Appl Pal is online now
A new question is answered every 9 seconds

How do I access the CCU or the MCU on a Kenmore Elite HE4t

This answer was rated:

How do I access the CCU or the MCU on a Kenmore Elite HE4t Front Load Washwer? I am getting an "F06" error.
Hello..It is my Pleasure To Be Working With You Today...Sorry you are having this problem today..Only way to access the CCU is to remove the top..At the top back will be three screws along the back..Remove the screws..Slide the top back and off.The MCU is located inside the cabinet at the bottom left hand side....There will also be a tech sheet taped to the top of the lid ..This is all you will need to service your washer.
Bob L Your Appl Pal and 4 other Appliance Specialists are ready to help you