How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9249
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
16832328
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

Absolutely dead whirlpool du945pwpq2 no lights on panel and

This answer was rated:

Absolutely dead whirlpool du945pwpq2 no lights on panel and had standing water an inch deep in the tub

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 33 Years,
and have over 100,000 in home repairs and over 50,000 phone and internet repairs under my belt.

If you have standing water in the dishwasher sump and the unit is dead I have to assume you have an open thermal fuse on the control board inside the door .

CLICK HERE for part info

This is a common issue ,where the wiring at the fuse becomes loose and has created enough heat to prematurely open the thermal fuse .

Use every part that comes in the kit !

Whrlp Master Tech and 3 other Appliance Specialists are ready to help you
Customer: replied 3 years ago.
I have ordered this part. Do I un-half the door to get at the panel is it the black module inside. How do I access that part and change the fuse?

Related Appliance Questions