Model #SHX46A05UC/40. Yes the water is hot and steamy.
There isn't a display.
Please let me know if you have additional questions or need clarification. There is no additional charge for any follow up help!
The link below is to the part you will need from a highly recommended company rated A+ with the Better Business Bureau. They offer a 100% money back guarantee, EVEN ON INSTALLED ELECTRICAL PARTS, for an entire year! They are the only company to allow returns on installed parts for a refund and offer a FULL ONE YEAR WARRANTY!
Turbidity Sensor <----- CLICK HERE FOR THE CORRECT PART FOR YOUR MODEL
Repair Video <----- CLICK HERE FOR THE REPAIR VIDEO
Please remember to leave positive feedback before you leave. If you have any other questions, please let me know! You may continue asking follow-up questions until you have all the information you need, even after rating my service. Thank you!
I feel that the soil sensor makes sense. The water response does not make sense the spray arms are impeded and it leaks alot of water, not just from one spray arm.
Are the spray arms clear? If they are not all clear, the spray will be affected and can "skim" the top of the water, causing the water to get pushed up over the front edge of the tub. Poor pressure from clogged filters can cause the same issue.
They are clear and the water collects at the bottom of the unit and spills out the front.
I haven't noticed the sound of water splashing around-the unit is very quiet. We have checked the filters and they are clear.
It seems like it comes out toward the end of the cycle. Yesterday, we thought we fixed it and it ran for approx 4 hours. We stopped it and then the water started coming out the front. Its almost like its not sensing when to stop the water from coming in.
Yes, it does not leak right away. When we noticed it leaking last night, we switched it to rinse and hold and then it drained the remaining water in the bottom as it normally would.