How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Barry G. Your Own Question
Barry G.
Barry G., Home Appliance Technician
Category: Appliance
Satisfied Customers: 6823
Experience:  27 years in home appliance repair. EPA refrigerant transition and recovery certification type I & II.
11179659
Type Your Appliance Question Here...
Barry G. is online now
A new question is answered every 9 seconds

how to install new rubber gasket on my frezzer door

This answer was rated:

how to install new rubber gasket on my frezzer door
Hello my name is XXXXX XXXXX you for choosing our service.

Give me just a few minutes to type it out for you. I know exactly how it installs.

Thanks,
Barry
Pick a top corner and pull, the whole gasket will pull right off.

Make sure the door is clean there where your new gasket is going, check the bottom of the door as well.

Take your new gasket and press a top corner in.
Go across to the opposite top corner and press that one in. Then press in the 2 remaining corners at the bottom.

Press in about halfway up the door on both sides, then press in the center at the top and bottom.

Then work in the rest of the gasket.

Now there may small gaps. Take a hair dryer and heat those area's and they will expand to close up the gap. Let them cool and your done.

Please ask if you have questions, if not then please leave a rating for me.

Thanks,
Barry
Barry G. and 2 other Appliance Specialists are ready to help you