How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask John Your Own Question
John, Home Appliance Technician
Category: Appliance
Satisfied Customers: 26795
Experience:  Appliance repair business owner for over 43 years.
Type Your Appliance Question Here...
John is online now
A new question is answered every 9 seconds

how do i repair an inglis 6 cycles washer when the rinse cycle

This answer was rated:

how do i repair an inglis 6 cycles washer when the rinse cycle water not draining out?
Hi I,m John I will help you with the washer problem .
You said the model number is XXXXX is it because its missing from the washer, I do require it to help you effectively, can you get it for me /
Customer: replied 3 years ago.

i don't know where to find it

Open the lid you should see the model plate at that location..
Customer: replied 3 years ago.

model 1j42001
ser(NNN) NNN-NNNN/p>

Thank you ,The washer will agitate ok then when it gets to the pump out at the end of the agitation cycle the water stays in the tub is that correct ?
Customer: replied 3 years ago.

yes thats correct

Ok, the problem is the lid switch,its a common problem with all the direct drive washers .
Open this link for the part number and a video on how to replace the lid switch .
If you require further assistance let me know please .
John and other Appliance Specialists are ready to help you

Related Appliance Questions