How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Tyler Z. Your Own Question
Tyler Z.
Tyler Z., Appliance Doc
Category: Appliance
Satisfied Customers: 74454
Experience:  9+ years being an appliance technician with factory training.
13574879
Type Your Appliance Question Here...
Tyler Z. is online now
A new question is answered every 9 seconds

electrolux oven mod # XXXXX oven was not regulating

This answer was rated:

electrolux oven mod # XXXXX oven was not regulating temp.replaced relay boartd and as soon as i plugged it in and touch any of the controls f15 popps up. help
Hello, and thank you for using this service. I'll be helping you with your problem today.

So the exact definition of this F15 error means indicates the ESEC-UIB is not receiving a synchronization signal from the ESEC-Relay Board. Now that may sounds like a bunch of jibberish, but what it's saying in essence is that the display board isn't communicating with your relay board. Make sure the wire connections are secure between the display and relay board. If everything looks good, then you need to replace the display board since there is no way to really know whether the display or the relay board is the problem, but since you replace the relay board already, that leaves only the display board.



Tyler Z. and 2 other Appliance Specialists are ready to help you