How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask MRANSWER Your Own Question
MRANSWER, Home Appliance Technician
Category: Appliance
Satisfied Customers: 6157
Type Your Appliance Question Here...
MRANSWER is online now
A new question is answered every 9 seconds

Our LC WM2455HW is a little blinky right now. Worked fine

This answer was rated:

Our LC WM2455HW is a little blinky right now.

Worked fine earlier this morning. Now, however, when I turn on the washer, none of the display light activate (face of the washer stays dark) and rotating the main control knob does not cause any sounds. The only sounds are power on and power off.


(Thanks in advance.)
Make sure the wire harness connections are all tight between the display board and the main board. If they are then you have an issue with either of those boards and the only way to know which is to replace them until the machine works. There is no test for the problem you describe to pinpoint which board.

Parts vary by serial# XXXXX these units, so let whatever supplier you choose to buy from look up the parts so you get the right ones. Repairclinic allows parts to be returned even if tried, so that would be the way to go here so you are only buying the one board.
MRANSWER and 4 other Appliance Specialists are ready to help you

Related Appliance Questions