How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Whrlp Master Tech Your Own Question
Whrlp Master Tech
Whrlp Master Tech, Whirlpool Master Technician
Category: Appliance
Satisfied Customers: 9052
Experience:  30 years Appliance Field 15 yr with Whirlpool Corp. 9 yrs Whirlpool Technical Assistance Line
Type Your Appliance Question Here...
Whrlp Master Tech is online now
A new question is answered every 9 seconds

I have a Whirlpool Quiet Partner III and no matter which cycle

This answer was rated:

I have a Whirlpool Quiet Partner III and no matter which cycle I try to run, it says that there are 2 minutes left in the cycle, which runs down and turns off. THe diagnostic cycle runs fine, it cycles through all of the modes quickly, so it appears that the functionality is still there. Is there some way to get it back to normal?

Hello from JA
My name is Woody.
I will be glad to assist you today.
I have been servicing ALL Major Brands of Appliances for 33 Years,
and have over 100,000 in home repairs and over 50,000 phone and internet repairs under my belt.

Lets try reseting the control by turning the power off and back on and see if that clears the control .

Customer: replied 3 years ago.

Hi Woody!

I flipped the breaker for about a minute.


Customer: replied 3 years ago.

That did not work

ok then if that did not reset the control it has to be in the control board .

And the control will need to be replaced.

CLICK HERE for part info

Whrlp Master Tech and other Appliance Specialists are ready to help you

Related Appliance Questions