How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Bryan Your Own Question
Bryan, Home Appliance Technician
Category: Appliance
Satisfied Customers: 12156
Experience:  15 yrs. experience as a certified appliance technician.
Type Your Appliance Question Here...
Bryan is online now
A new question is answered every 9 seconds

I have a GE washer machine and sometimes stops before the final

This answer was rated:

I have a GE washer machine and sometimes stops before the final step of spin and the panel reads error E43. It does not remove the exess water from the clothes and the problem is intermitent. It is a model GLTF2940FS2

Hello, Thank you for using this service, I will be helping you with your problem today

E43 DC Fault -


Inverter failure. Non-recoverable error.

Replace inverter control board.

check your connections at the inverter control board. its inside on the floor of the machine. Unplug the plugs and plug them back in. since this is intermittent it sounds like a plug is loose.

Bryan and other Appliance Specialists are ready to help you