Need Appliance Repair Help? Ask a Technician for Answers ASAP
Hello my name is Rick and I will assist you today
Are you getting the error code every time you try a load?
Is water going into the machine?
NO WATER DETECTED ENTERING WASHER OR PRESSURE SWITCH TRIP NOT DETECTED
The washer does not detect water input after 13 minutes of filling. Possible Causes• Is water supply connected and turned on?• Check for blocked or kinked inlet hoses. • Low water pressure or blocked hose screens.• Check for proper drain hose installation. Is water siphoning out of the drain hose? Drain hose must not be more than 4.5" (113 mm) into drain pipe. • Check connections from tub to air trap, air trap to pressure hose, and pressure hose to pressure sensor.
Is pressure hose pinched, kinked, plugged, or leaking air?
The pressure switch is tripped, did you say or running the machine right now? Is it running with that error up
I saw you came on line but never say a comment
I wanted to check back and make sure you were able to take care of your problem. If there is anything I can do let me know